Conductive 3D Printer Filament 1.75 / 3.0mm
2, Manner and packing: use vacuum package, the net weight 1.0KG.
3, Density is small, good elasticity, good toughness.
4, ABS is soft than PLA.
5, good performance of electroplating.
6, Working temperature 230°C -270°C.
7, Variable Temperature ABS print strips change color temperature is
Advsntages: Conductive electricity
Disaavantages: Can do only Black color.
Applicable models: Suitable for Markerbot, RepRap,Cubify and UP 3D Printer.
Quality Control :
1, All of Our 3D Printer Filament are 100% virgin material, never use
recycled material or regrind material, and all had achieved the
latest REACH certificate.
2, Before the mass production, our engineer always do the test to
make sure that sure that each batch of new raw materials must be
printed by 3D printer.
3, The Laser diameter runs automatically to control the diameter of
the filament and keeps it in a right range of 1.75 / 3.0mm, and our
engineer will adjust it immediately when it alarms to indicate of
wrong size, and this unqualified filament will be cut off and never
4, We to keep the filaments dry, each roll of filament is packed in a
vacuumed poly bag with a desiccant inside of it.
Manner and packing: We use plastic tray, the net weight 1.0KG, we put desiccant in it,
package, every Tray into a small box, and the each 8 small box into
a master carton.
4,Plastic tray: diameter 160mm, axle hole32mm, overall height 90mm.the
corresponding carton 35.8×35.8×22.5cm Diameter 200mm, axle hole 56mm, overall height
70mm. the corresponding carton 43.5×43.5×18cm